English
2 min Reading time If your inverter communicates with your router via WiFi, the WiFi password is also stored in the inverter. When you change your router (e.g., when switching providers) or update your WiFi password, the inverter usually needs to be reconfigured to maintain the connection. This guide explains how to do that.
This step-by-step guide applies only to SolarEdge inverters without a display (using compact technology) that are equipped with WiFi.
Follow the steps below.
Array
(
[0] => Array
(
[MIGX_id] => 1
[step] => Step 1
[description] => <div class="description">
<p>In the app click on the three horizontal stripes top left and then click on "Inverter Communication." The app will now open the camera on your smartphone. </p>
<p><img src="assets/uploads/faq/Wifi wachtwoord SolarEdge/faq-wifi-se-inverter-comm.jpg" alt="homescreen MySolarEdge app" width="300" /></p>
</div>
[disabled] =>
[step_ro] =>
[_this.value] => Step 1
)
[1] => Array
(
[MIGX_id] => 2
[step] => Step 2
[description] => <div class="date-item">
<div class="description">
<p>Point the camera to the QR code on the inverter</p>
</div>
<div class="hover-image"><img src="assets/uploads/faq/Wifi wachtwoord SolarEdge/faq-wifi-se-scan-qr.jpg" alt="QR code scanner on MySolarEdge app" width="300" height="533" /></div>
</div>
<div class="date-item"> </div>
[disabled] =>
[step_ro] =>
[_this.value] => Step 2
)
[2] => Array
(
[MIGX_id] => 3
[step] => Step 3
[description] => <div class="description">
<p>The app will now ask you to push the switch at the bottom of the device to the left (to the P position) and immediately release it.</p>
<p><img src="../assets/uploads/faq/Wifi wachtwoord SolarEdge/stap3.png" alt="" width="500" height="556" /></p>
</div>
[disabled] =>
[step_ro] =>
[_this.value] => Step 3
)
[3] => Array
(
[MIGX_id] => 4
[step] => Step 4
[description] => <div class="date-item">
<div class="description">
<p>If the inverter does not have an existing connection to a WiFi network in your home, you can click on the 'Configure' button at the bottom.</p>
<p><img src="assets/uploads/faq/Wifi wachtwoord SolarEdge/faq-wifi-solaredge-configure-screenshot.jpg" alt="" width="300" /></p>
</div>
</div>
[disabled] =>
[step_ro] =>
[_this.value] => Step 4
)
[4] => Array
(
[MIGX_id] => 5
[step] => Step 5
[description] => <div class="date-item">
<div class="description">
<p>You can then select the WiFi network, click on it, and enter the password.</p>
<p><img src="assets/uploads/faq/Wifi wachtwoord SolarEdge/faq-wifi-solaredge-beschikbare-netwerken.jpg" alt="" width="300" /></p>
</div>
</div>
[disabled] =>
[step_ro] =>
[_this.value] => Step 5
)
[5] => Array
(
[MIGX_id] => 6
[step] => Step 6
[description] => <div class="">
<div class="timeline-block uk-grid">
<div class="uk-width-1-2@s uk-width-1-1">
<div class="dates hovered">
<div class="date-item">
<div class="description">
<p>Click on ‘Connect’, and then ‘OK’. After a few seconds, the connection should be restored.</p>
</div>
</div>
</div>
</div>
</div>
</div>
[disabled] =>
[step_ro] =>
[_this.value] => Step 6
)
)
In the app click on the three horizontal stripes top left and then click on "Inverter Communication." The app will now open the camera on your smartphone.
Point the camera to the QR code on the inverter
The app will now ask you to push the switch at the bottom of the device to the left (to the P position) and immediately release it.
If the inverter does not have an existing connection to a WiFi network in your home, you can click on the 'Configure' button at the bottom.
You can then select the WiFi network, click on it, and enter the password.
You can also view this video from SolarEdge on YouTube: https://www.youtube.com/watch?v=jRYPMGNOJho
