There are several ways to access the inverter's user interface. Here, we'll demonstrate the method using the SMA Energy App and the QR code on the inverter.

Array
(
    [0] => Array
        (
            [MIGX_id] => 1
            [step] => Step 1: SMA Energy App
            [description] => <p>Grab your SMA Energy App and click on the 'My area' icon at the bottom right</p>
<p><img src="assets/uploads/faq/FAQ-instellen-reservecapaciteit-noodstroom/klik-op-mijn-weergavegebied.jpg" alt="SMA Energy app - Mijn weergavegebied" width="300" height="593" /></p>
            [disabled] => 
            [step_ro] => 
            [_this.value] => Step 1: SMA Energy App
        )

    [1] => Array
        (
            [MIGX_id] => 2
            [step] => Step 2: QR-code
            [description] => <p>Locate the QR-code on your inverter: inside the red circle on this picture</p>
<p><img src="assets/uploads/faq/FAQ-instellen-reservecapaciteit-noodstroom/stpse-met-3-batterijen-encirkel-om-qr-code.jpeg" alt="QR-code op STPSE" width="400" height="421" /></p>
            [disabled] => 
            [step_ro] => 
            [_this.value] => Step 2: QR-code
        )

    [2] => Array
        (
            [MIGX_id] => 3
            [step] => Step 3: open the scanner
            [description] => <p>Click on "Quick access to devices" in the SMA Energy app. Your phone will usually ask if you want to grant the app access to your camera: grant permission.</p>
<p><img src="assets/uploads/faq/FAQ-wifi-instellen-SMA/faq-qr-code-scanner.jpg" alt="QR code scanner in app" width="300" height="538" /></p>
            [disabled] => 
            [step_ro] => 
            [_this.value] => Step 3: open the scanner
        )

    [3] => Array
        (
            [MIGX_id] => 4
            [step] => Step 4: Scan the QR-code
            [description] => <p>Point the scanner at the QR code: the login screen will now open</p>
<p><img src="assets/uploads/faq/FAQ-wifi-instellen-SMA/Richt_scanner_op_QR_code.jpg" alt="QR-code omvormer" width="342" height="279" /></p>
            [disabled] => 
            [step_ro] => 
            [_this.value] => Step 4: Scan the QR-code
        )

    [4] => Array
        (
            [MIGX_id] => 5
            [step] => Step 5: Log in
            [description] => <p>Log in on the inverter user interface with the user group 'Installer' and the password made up of: 0+your postcode+_zf</p>
<p><img src="assets/uploads/faq/FAQ-instellen-reservecapaciteit-noodstroom/inloggen-als-installateur-met-0.jpg" alt="Inloggen" width="500" height="483" /></p>
            [disabled] => 
            [step_ro] => 
            [_this.value] => Step 5: Log in
        )

    [5] => Array
        (
            [MIGX_id] => 6
            [step] => Step 6: Start the Installation Assistant
            [description] => <p>Go to the user settings and launch the 'Installation Assistant'</p>
<p><img src="assets/uploads/faq/FAQ-wifi-instellen-SMA/faq-installatiewizard-starten.jpg" alt="installatiewizard starten" width="300" height="553" /></p>
            [disabled] => 
            [step_ro] => 
            [_this.value] => Step 6: Start the Installation Assistant
        )

    [6] => Array
        (
            [MIGX_id] => 7
            [step] => Step 7: Follow the Installation Assistant steps
            [description] => <p>The installation assistant will take you through a series of screens where you don't need to do anything. Click "Save and Continue" or "Continue" on each page until you reach the correct page.</p>
<p><img src="assets/uploads/faq/FAQ-instellen-reservecapaciteit-noodstroom/netwerkinstellingen-opslaan-en-verder.jpg" alt="Opslaan en verder klikken" width="300" height="595" /></p>
            [disabled] => 
            [step_ro] => 
            [_this.value] => Step 7: Follow the Installation Assistant steps
        )

    [7] => Array
        (
            [MIGX_id] => 8
            [step] => Step 8: Set the desired percentage
            [description] => <p>After a few pages, you'll arrive at the "Battery-backup system" section. Here you can adjust the battery capacity percentage under the heading "Lower battery charge limit."</p>
<p><img src="assets/uploads/faq/FAQ-instellen-reservecapaciteit-noodstroom/onderste-ontladingsgrens-soc.jpg" alt="noodstroom reserve instellen" width="300" height="597" /></p>
            [disabled] => 
            [step_ro] => 
            [_this.value] => Step 8: Set the desired percentage
        )

    [8] => Array
        (
            [MIGX_id] => 9
            [step] => Step 9: Save the setting
            [description] => <p>Once you have entered the desired value, click 'Save and next'</p>
<p><img src="assets/uploads/faq/FAQ-instellen-reservecapaciteit-noodstroom/noodstroomwaarde-opslaan-en-verder.jpg" alt="waarde opslaan" width="300" height="602" /></p>
            [disabled] => 
            [step_ro] => 
            [_this.value] => Step 9: Save the setting
        )

    [9] => Array
        (
            [MIGX_id] => 10
            [step] => Step 10: Complete the installation assistant
            [description] => <p>Continue until you reach the summary. Scroll down. You'll see the value that you set in the summary. Click "Continue." This completes the setup.</p>
<p><img src="assets/uploads/faq/FAQ-instellen-reservecapaciteit-noodstroom/samenvatting-en-verder.jpg" alt="Samenvatting en afsluiten wizard" width="300" height="592" /></p>
            [disabled] => 
            [step_ro] => 
            [_this.value] => Step 10: Complete the installation assistant
        )

    [10] => Array
        (
            [MIGX_id] => 11
            [step] => Step 11: End
            [description] => <p>You have now set a minimum reserve. If the battery charge is below the set minimum at the time you set this, it will initially charge to that level. From then on, this limit remains the lower limit of the charge, unless the public grid fails and the reserve needs to be used for backup power.</p>
            [disabled] => 
            [step_ro] => 
            [_this.value] => Step 11: End
        )

)